Body Control Module: Service and Repair

Removal and Installation of BCM

REMOVAL

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation.

1. Disconnect negative battery cable.
2. Remove driver lower instrument panel.




3. Remove screws (2) and release BCM from steering member.
4. Disconnect connectors and then remove BCM.

INSTALLATION
Install in the reverse order of removal.

NOTE:
- When replacing BCM, it must be configured.
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs.