Navigation System

SELF-DIAGNOSIS RESULT

Quick Reference Table
1. Select an applicable diagnosis No. in the diagnosis result quick reference table.
2. Find estimated malfunctioning system in the diagnosis No. table and perform check by referring to the AV communication line wiring diagram. Refer to AV-65, "Wiring Diagram - NAVI -". AV-NAVI




3. Turn ignition switch to OFF and perform self-diagnosis again.

CAUTION:
- If self-diagnosis cannot be activated, refer to "Navigation System is Not Operated by NAVI Switch" and repair items found in non-standard condition.
- If the display is not shown normally and the diagnostic results are not confirmed, refer to "Screen is Not Shown" and repair items found in non-standard condition.




Self-Diagnosis Codes