CONSULT-II Basic Operation Procedure (IPDM E/R)

CONSULT-II Function (IPDM E/R)

BASIC OPERATION PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

1. Turn ignition switch "OFF".




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
3. Turn ignition switch "ON".




4. Touch "START(NISSAN BASED VHCL)".




5. Touch "IPDM".
If "IPDM" is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




6. Select diagnosis mode.
"DATE MONITOR" and "ACTIVE TEST" are available.