Self Diagnostic Operation Procedure

Self-Diagnosis Mode

OPERATION PROCEDURE




1. Start the engine.
2. Push and hold "MAP" and "DAY/NIGHT" switches simultaneously for 5 seconds or more.
- Push the "PREVIOUS" switch and the initial system screen will be shown.




3. The initial trouble diagnosis screen will be shown, and items "SELF-DIAGNOSIS" and "CONFIRMATION/ADJUSTMENT" will become selective.




4. Perform self-diagnosis by selecting the "SELF-DIAGNOSIS".
- Self-diagnosis subdivision screen will be shown and the operation enters the self-diagnosis mode.
- A bar graph shown below the self-diagnosis subdivision screen indicates progress of the diagnosis.




5. On the "Self diagnosis" screen, each unit name will be colored according to the diagnosis result, as follows.
Green: No malfunctioning.
Yellow: Cannot be judged by self-diagnosis results.
Red: Unit is malfunctioning.
Gray: Diagnosis has not been done.

- If multiple malfunctions occur at the same time for a single unit, the screen switch colors are determined according to the following order of priority: red > yellow > gray.
- Display when it is normal
- Between Navigation Unit and GPS Antenna is connected in a green.
- Between Navigation Unit and Satellite Switch, Navigation Unit and Display are connected in gray.




6. Select a switch on the "Self diagnosis" screen and comments for the diagnosis results will be shown.