Front Bumper: Service and Repair

FRONT BUMPER




Removal and Installation

CAUTION: Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with oil.

REMOVAL
1. Remove clips of bumper fascia upper portion.
2. Remove screw of bumper fascia lower portion.
3. Remove screws of bumper fascia both side.
4. Remove screws and bolts of both right/left fender protectors on front side. Refer to"FENDER PROTECTOR".
5. Pull out both right/left of bumper fascia and remove bumper fascia assembly.
6. Remove energy absorber.
7. Remove bolts and nuts of bumper reinforcement and remove bumper fascia.
8. Remove clips of bumper shield-sight and remove bumper shield-sight.
9. Remove bolts of bumper stay and remove bumper stay.

INSTALLATION
Install in the reverse order of removal.

Removal of Bumper Side Reflector (Left Side)
1. Remove bumper assembly.
2. Remove screw of bumper side reflector.

Installation
Install in the reverse order of removal.

Removal of Bumper Side Reflector (Right Side)
1. Remove bumper assembly.
2. Remove screw of bumper side reflector.

Installation
Install in the reverse order of removal.