Back Door

BACK DOOR




Fitting Adjustment

VERTICAL/LATERAL CLEARANCE ADJUSTMENT
1. Remove back door weatherstrip. Refer to "Removal and Installation of Back Door Weatherstrip".
2. Remove the luggage finisher lower (center). Refer to "LUGGAGE FLOOR TRIM".
3. Loosen the back door lock mounting bolts. Raise the back door lock to the top position, and temporarily tighten the back door lock mounting bolt at the position.
4. Close the back door lightly and adjust the surface height, then open the back door to finally tighten the back door lock mounting bolts to the specified torque.