Back Door Lock

Removal and Installation of Back Door Lock & Back Door Opener Actuator

REMOVAL
1. Remove back door weatherstrip. Refer to "Removal and Installation of Back Door Weatherstrip".
2. Remove luggage finisher lower (center). Refer to "LUGGAGE FLOOR TRIM".
3. Disconnect the connector and the clip of the back door opener.




4. Remove the mounting bolts.
5. Disconnect the connector of the back door opener actuator and back door opener cable, remove the bracket.




6. Remove the mounting nuts, remove back door lock and back door opener actuator.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installing, check operation.
- After installing, perform fitting adjustment. Refer to BL-109, "Fitting Adjustment". Back Door