Operation CHARM: Car repair manuals for everyone.

Trunk Lid Lock

TRUNK LID

Removal and Installation of Trunk Lid Lock Assembly

REMOVAL
1. Remove the trunk lid weatherstrip. Refer to "Removal and Installation of Trunk Lid Weatherstrip".
2. Remove trunk lid release lever. Refer to "Removal and Installation (for Roadster Models)".
3. Remove the trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER".




4. Disconnect the release lever cable and trunk lid opener cable from the clip.
5. After removing the harness connector, remove the mounting bolts, and remove the trunk lid lock.

INSTALLATION
1. Install in the reverse order of removal.

CAUTION:
- After installing, close the trunk lid height. Perform the lock and surface height adjustment. Refer to BL-116, "Fitting Adjustment". Trunk Lid
- After installing, check the operation.