Trunk Lid Weatherstrip

TRUNK LID




Removal and Installation of Trunk Lid Weatherstrip

REMOVAL
Pull up and remove engagement with body from weatherstrip joint.

CAUTION: After removal, do not pull strongly on the weatherstrip.

INSTALLATION
Install in the reverse order of removal.
1. Install the weatherstrip from the front with the vehicle center mark aligned to the weatherstrip mark.
2. At rear side, align the weatherstrip seam to the center of the striker.
3. After installing, pull the weatherstrip lightly to check for looseness.

CAUTION: The weatherstrip should fit tightly onto the corners and trunk lid rear plate.