Roadster

ROOF SIDE MOLDING




Removal and Installation (for Roadster Models)

FRONT PILLAR FINISHER

Removal
1. Open soft top.
2. Remove clip and double-faced adhesive tapes of body side glass-run rubber.

NOTE: Slide body side glass run slightly upward to remove clip on middle portion of glass run rubber side from retainer.

3. Remove body side glass-run rubber.
4. Remove screw of retainer.
5. Remove screw and clips of front pillar finisher.
6. Remove front pillar finisher.

Installation
Install in the reverse order of removal.

BODY SIDE WEATHERSTRIP

Removal
1. Open soft top.
2. Disconnect clips and remove body side weatherstrip.

Installation
Install in the reverse order of removal.