Seatback Trim and Pad (Manual Seat And Power Seat)
Disassembly and AssemblySEATBACK TRIM AND PAD (MANUAL SEAT AND POWER SEAT)
Disassembly
1. Open fastener on back of seatback, and remove retainer from seatback trim.
2. Remove the stay securing the inner cloth.
3. Squeeze and pull up headrest holder tabs to remove from seatback frame.
NOTE: Before installing the headrest holder, check its orientation (front/ rear and right/left).
4. Remove the seat heater harness connector. After removing the seatback trim and pad, remove the hog ring to separate the trim and pad.
NOTE: Seatback heater unit is stitched into seatback trim. It cannot be separated (for heated seat models only).
Assembly
Assemble in the reverse order of disassembly.