Convertible Top Switch: Service and Repair

SOFT TOP

Removal and Installation of Switches

REMOVAL
1. Uninstall soft top assembly from the vehicle. Remove roof actuator (RH/LH) from the soft top.
2. Remove harness tie wrap band at the left side of the soft top.




3. Remove limit switches with plate rail RR bracket by removing bolt.




4. Remove limit switches with soft top switch bracket1 by removing bolt.




5. Remove limit switches with soft top switch bracket 2 by removing bolt.

INSTALLATION
Install in the reverse order of removal.

NOTE: Wire harnesses correctly to avoid following situation.

- Pinching harnesses by frame
- Tangling harnesses by frame and links
- Pulling harnesses between fixing point by harness clips.