Removal and Installation

COOLING FAN

Removal and Installation
REMOVAL
1. Remove engine cover with power tool. Refer to "INTAKE MANIFOLD COLLECTOR".
2. Drain engine coolant from radiator. Refer to "Changing Engine Coolant".

CAUTION:
^ Perform this step when engine is cold.
^ Do not spill engine coolant on drive belts.

3. Remove air cleaner case assembly. Refer to "AIR CLEANER AND AIR DUCT".
4. Disconnect radiator hose (upper) at radiator side. Refer to "RADIATOR".





5. Disconnect fan motor harness connectors at the right-lower portion of fan shroud.
6. Remove mounting bolts to lift up and radiator cooling fan assembly.

CAUTION: Be careful not to damage or scratch on radiator core.

INSTALLATION
Install in the reverse order of removal.
^ Cooling fans are controlled by ECM. For details, refer to "DTC P1217 ENGINE OVER TEMPERATURE".