High-Mounted Stop Lamp (Roadster Models)

High-Mounted Stop Lamp (Roadster Models)

BULB REPLACEMENT, REMOVAL AND INSTALLATION




1. Turn ignition switch ON, and turn soft-top OPEN/CLOSE switch ON.
2. When the storage lid is fully opened, soft-top OPEN/CLOSE switch to OFF.
3. Remove battery negative cable.
4. Disconnect high-mounted stop lamp connector.
5. Remove high-mounted stop lamp. Be sure to pull toward the arrow in the figure.
6. Remove high-mounted stop lamp assembly from storage lid.
7. Installation is the reverse order of removal.
High-mounted stop lamp : LED