Tail Lamp: Service and Repair

REAR COMBINATION LAMP

Removal and Installation

REMOVAL

Rear Fender Side




1. Remove plugs and remove rear combination lamp mounting bolts.
2. Pull rear combination lamp toward side of the vehicle and remove from the vehicle.
3. Disconnect rear combination lamp connector.

Rear Bumper Side




1. Remove rear bumper fascia. Refer to "REAR BUMPER" in "EI" section.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting screws.
4. Remove rear combination lamp from rear bumper fascia.

INSTALLATION
Installation is the reverse order of removal. Be careful of the following:
Rear combination lamp (Rear fender side) mounting bolt: 5.5 Nm (0.56 kg-m, 49 in-lb)