A/T Check Indicator Lamp Does Not Come On

A/T Check Indicator Lamp Does Not Come On

SYMPTOM:
A/T CHECK indicator lamp does not come on for about 2 seconds when turning ignition switch to "ON".

DIAGNOSTIC PROCEDURE
1. CHECK CAN COMMUNICATION LINE
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", With Manufacturer's Scan Tool AT-104, "Diagnostic Procedure Without CONSULT-II". Without Scan Tool

Is a malfunction in the CAN communication indicated in the results?
YES >> Check CAN communication line. Refer to "DTC U100 CAN COMMUNICATION LINE".
NO >> GO TO 2.

2. CHECK A/T CHECK INDICATOR LAMP CIRCUIT
Check combination meter. Refer to "COMBINATION METERS".

OK or NG
OK >> GO TO 3.
NG >> Repair or replace damaged parts.

3. CHECK TCM POWER SUPPLY AND GROUND CIRCUIT
Check TCM power supply and ground circuit. Refer to "MAIN POWER SUPPLY AND GROUND CIRCUIT".

OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.