Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D" or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", With Manufacturer's Scan Tool AT-104, "Diagnostic Procedure Without CONSULT-II". Without Scan Tool
Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> GO TO 2.
2. CHECK CONTROL LINKAGE
Check control linkage. Refer to Checking of A/T Position".
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.
3. CHECK STARTING SYSTEM
Check starting system. Refer to "STARTING SYSTEM".
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.