In "P" Position, Vehicle Moves When Pushed

In "P" Position, Vehicle Moves When Pushed

SYMPTOM:
Even though the selector lever is set in the "P" position, the parking mechanism is not actuated, allowing the vehicle to be moved when it is pushed.

DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", With Manufacturer's Scan Tool AT-104, "Diagnostic Procedure Without CONSULT-II". Without Scan Tool

Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> GO TO 2.

2. CHECK CONTROL LINKAGE





Check control linkage. Refer to "Checking of A/T Position".

OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.

3. CHECK PARKING COMPONENTS
Check parking components. Refer to "Parking Components".

OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

4. CHECK A/T FLUID CONDITION





1. Remove oil pan.
2. Check A/T fluid condition. Refer to "Control Valve with TCM and A/T Fluid Temperature Sensor 2".

OK or NG
OK >> INSPECTION END
NG >> Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to "Symptom Chart" (Symptom No. 55).