Fluid Pan, A/T

Install oil pan to transmission case.
Install oil pan gasket to oil pan.

CAUTION:
Do not reuse oil pan gasket.
Install it in the direction to align hole positions.
Complete remove all moisture, oil and old gasket, etc. from oil pan gasket mounting surface.





Install oil pan (with oil pan gasket) to transmission case.

CAUTION:
Install it so that drain plug comes to the position as shown in the figure.
Be careful not to pinch harnesses.
Complete remove all moisture, oil and old gasket, etc. from oil pan mounting surface.





Tighten oil pan mounting bolts to the specified torque in numerical order shown in the figure after temporarily tightening them.

Tighten bolts 7.9 Nm (0.81 kg-m, 70 inch lbs.)

CAUTION: Do not reuse oil pan mounting bolts.