Brake Rotor/Disc

FRONT


CLZ25VD Type
Thickness Inspection





Using a micrometer, check thickness of the disc rotor. If thickness is outside the standard, replace disc rotor.
Standard
Standard thickness 24.0 mm (0.945 inch)
Wear limit 22.0 mm (0.866 inch)
Maximum uneven wear (measured at 8 positions) 0.015 mm (0.0006 inch) or less

OPB27VA Type
Thickness Inspection





Using a micrometer, check thickness of the disc rotor. If thickness is outside the standard, replace disc rotor.
Standard
Standard thickness 30.0 mm (1.181 inch)
Wear limit 28.4 mm (1.118 inch)
Maximum uneven wear (measured at 8 positions) 0.015 mm (0.0006 inch) or less

REAR

AD14VE Type
Thickness Inspection





Using a micrometer, check thickness of the disc rotor. If thickness is outside the standard, replace disc rotor.
Standard
Standard thickness 16.0 mm (0.630 inch)
Wear limit 14.0 mm (0.551 inch)
Maximum uneven wear (measured at 8 positions) 0.015 mm (0.0006 inch) or less

OPB13VB Type
Thickness Inspection





Using a micrometer, check thickness of the disc rotor. If thickness is outside the standard, replace disc rotor.
Standard
Standard thickness 22.0 mm (0.866 inch)
Wear limit 20.2 mm (0.795 inch)
Maximum uneven wear (measured at 8 positions) 0.015 mm (0.0020 inch) or less