Exhaust Manifold

Exhaust Manifold
^ If stud bolts were removed, install them and tighten to the specified torque.
Tightening Torque 12.7 - 16.7 Nm (1.3 - 1.7 kg-m, 10 - 12 ft. lbs.)





^ Install mounting exhaust manifold in numerical order as shown in the figure.

NOTE: Tighten nuts No. 1 and 2 in two steps. The numerical order No. 7 and 8 shown second step.

Exhaust manifold cover 5.8 Nm (0 59 kg-m, 51 ft. lbs.)*2
Exhaust manifold stud 14.7 Nm (1.5 kg-m, 11 ft. lbs.)
*1 Exhaust manifold 30.5 Nm (3.1 kg-m, 22 ft. lbs.)
Tree way catalyst 63.0 Nm (6.4 kg-m, 46 ft. lbs.)

*1: Parts to be tightened in particular orders.