Removal and Installation

Removal and Installation

REMOVAL

CAUTION: Before disconnecting the battery, lower both the driver and passenger windows. This will prevent any interference between the window edge and the vehicle when the door is opened/closed. During normal operation, the window slightly raises and lowers automatically to prevent any window to vehicle interference. The automatic window function will not work with the battery disconnected.




1. Remove hoodledge cover (right).




2. Disconnect both battery cables from terminals.

CAUTION: When disconnecting, disconnect the battery cable from the negative terminal first.

3. Remove clips of cowl top cover (right) and it raises to the up side.
4. Remove battery fix frame mounting nuts and battery fix frame.
5. Remove relay box from bracket.
6. Remove battery.

INSTALLATION
Installation is the reverse order of removal.

CAUTION: When connecting, connect the battery cable to positive terminal first.

Battery fix frame mounting nut: 3.9 Nm (0.4 kg-m, 35 in-lb)

Battery cable tightening nut: 5.4 Nm (0.55 kg-m, 48 in-lb)