Cannot Be Changed to Manual Mode

Without Scan ToolCannot Be Changed to Manual Mode

SYMPTOM:
Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE
1. MANUAL MODE SWITCH
Check manual mode switch. Refer to "DTC P1815 MANUAL MODE SWITCH".

OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", With Manufacturer's Scan Tool AT-104, "Diagnostic Procedure Without CONSULT-II". Without Scan Tool

Is any malfunction detected by self-diagnostic results? Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to "SELF-DIAGNOSTIC RESULT MODE", "Judgement Self-diagnosis Code".
NO >> INSPECTION END