CONSULT-II Inspection Procedure For Rear Window Defogger (BCM)

CONSULT-II INSPECTION PROCEDURE FOR REAR WINDOW DEFOGGER

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" and CONSULT-II CONVERTER to data link connector.
3. Turn ignition switch "ON".




4. Touch "START (NISSAN BASED VHCL)".




5. Touch "BCM" on "SELECT SYSTEM" screen.
If "BCM" is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic
6. Touch "REAR DEFOGGER" on "SELECT TEST ITEM" screen.




7. Select diagnosis mode,"DATA MONITOR" and "ACTIVE TEST"