CONSULT-II Inspection Procedure For Rear Window Defogger (IPDM E/R)

CONSULT-II INSPECTION PROCEDURE FOR REAR WINDOW DEFOGGER

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

1. Turn ignition switch "OFF".




2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.
3. Turn ignition switch "ON".




4. Touch "START(NISSAN BASED VHCL)".




5. Touch "IPDM E/R" on "SELECT SYSTEM SCREEN".
If "IPDM E/R" is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




6. Touch "REAR DEFOGGER" or "SELECT TEST ITEM" screen.
7. Select diagnosis mode. "SELF-DIAG RESULTS", "DATA MONITOR" and "ACTIVE TEST" are available.