With Manufacturer's Scan Tool (CONSULT-II) (BCM)

CONSULT-II BASIC OPERATION

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.




1. With ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to data link connector, then turn ignition switch ON.




2. Touch "START (NISSAN BASED VHCL)".




3. Touch "BCM" on "SELECT SYSTEM" screen
If "BCM" is not displayed, print "SELECT SYSTEM" screen, then refer to "CONSULT-II Data Link Connector (DLC) Circuit".




4. Touch "WIPER" on "SELECT TEST ITEM" screen.