Trunk / Liftgate Latch: Service and Repair

Removal and Installation of Trunk Lid Lock

LOCK REMOVAL
1. Remove the trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER".
2. Separate the key cylinder rod.
3. After removing the harness connector, remove the bolts and the trunk lid lock.

LOCK AND STRIKER INSTALLATION
1. Install the trunk lid lock and striker.
2. After installing, close the trunk lid lightly. Perform the lock and surface height adjustment. Refer to BL-80, "Fitting Adjustment". Adjustments
3. After installing, check the operation.