Glass Lid

CAUTION:
- Always work with a helper.
- Before removal, fully close the glass lid assembly. Then, after removal, do not move the motor assembly.
- After installing the sunroof and glass lid, check gap adjustment to ensure there is no malfunction.

GLASS LID

Removal
1. Open sunroof shade.
2. Ensure glass lid is closed.
3. Carefully pry away trim to access glass lid securing bolts.
4. Remove bolts securing glass lid assembly to sunroof assembly.

Installation
1. Position glass lid to sunroof assembly.
2. Tighten glass lid assembly bolts to specification. (First tighten left front bolt, then tighten right rear bolt on glass lid to prevent lid from moving while tightening other bolts.)
Glass lid assembly : 3.0 - 5.0 Nm (0.3 - 0.5 kg-m, 26 - 43 in-lb) mounting bolts

3. Position and push trim into place.
4. After installation, perform fitting adjustment.