Engine Lubrication: Service and Repair
Precautions for Liquid GasketREMOVAL OF LIQUID GASKET SEALING
^ After removing nuts and bolts, separate the mating surface, using Tool and remove old liquid gasket sealing.
Tool number : KV10111100 (J-37228)
CAUTION: Be careful not to damage the mating surfaces.
^ Tap Tool to insert it, and then slide it by tapping on the side as shown.
^ In areas where Tool is difficult to use, use plastic hammer to lightly tap the parts, to remove it.
CAUTION: If for some unavoidable reason suitable tool such as screwdriver is used, be careful not to damage the mating surfaces.