Fog/Driving Lamp: Service and Repair

Removal and Installation

ALL EXCEPT SE-R MODELS

Removal
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.

CAUTION:
- Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
- Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.

1. Remove inner splash shield.
2. Position the fender protector aside. Refer to "Removal and Installation".
3. Disconnect electrical connector.




4. Remove bolt from top of fog lamp.
5. Remove fog lamp.

Installation
Installation is in the reverse order of removal.

Confirm fog lamp aiming adjustment. Refer to "Aiming Adjustment".

SE-R MODELS

Removal
1. Remove the engine under cover using power tools.
2. Disconnect electrical connector.




3. Remove the fog lamp bolts from top and bottom of fog lamp.
4. Remove fog lamp.

Installation
Installation is in the reverse order of removal.

Confirm fog lamp aiming adjustment. Refer to "Aiming Adjustment"