Headlamp (Outer Side), For Low Beam (Halogen)

HEADLAMP (OUTER SIDE), FOR LOW BEAM (HALOGEN)

1. For LH side, remove air cleaner case. Refer to "Removal and Installation" (QR25DE) or "AIR CLEANER AND AIR DUCT" (VQ35DE).
For RH side, remove washer tank inlet and position coolant reservoir aside.

2. Turn the plastic cap counterclockwise to unlock it from the headlamp.
3. Disconnect the electrical connector.
4. Unlock the retaining spring and remove the bulb from the headlamp.

Installation is in the reverse order of removal.

CAUTION: After installing a headlamp bulb, be sure to install the plastic cap securely to ensure watertightness.