Disassembly and Assembly
Disassembly and AssemblyDISASSEMBLY
1. Turn the low beam plastic cap counterclockwise to unlock and remove it.
2. Turn the bulb socket counterclockwise to unlock and remove it (xenon).
3. Disconnect the electrical connectors from the bulb terminals (halogen).
4. Unlock the retaining springs and remove the low beam bulb.
5. Release the ignitor and remove from the plastic cap (xenon).
6. Turn the high beam lamp socket counterclockwise to unlock and remove it.
7. Turn the front turn signal lamp bulb socket counterclockwise and unlock it.
8. Remove the front turn signal lamp bulb from its socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION: After installing the xenon bulb, be sure to install the bulb socket and plastic cap securely to ensure watertightness.