Horn: Service and Repair

Removal and Installation




REMOVAL (HORN HIGH)
1. Remove right headlamp.
2. Disconnect horn connector.
3. Remove horn bolt, then remove the horn.

INSTALLATION (HORN HIGH)
1. Install the horn and tighten horn bolt to specified torque.

Horn bolt : 17 Nm (1.7 kg-m, 12.3 ft-lb)

2. Connect the horn connector.
3. Install right headlamp. Refer to "Removal and Installation"




REMOVAL (HORN LOW)
1. Remove left headlamp.
2. Disconnect horn connector.
3. Remove horn bolt, then remove the horn.

INSTALLATION (HORN LOW)
1. Install the horn and tighten horn bolt to specified torque.

Horn bolt : 17 Nm (1.7 kg-m, 12.3 ft-lb)

2. Connect the horn connector.
3. Install left headlamp.