Reading and Clearing Diagnostic Trouble Codes

CONSULT-II Function (BCM)




CONSULT-II can display each diagnostic item using the diagnostic test modes shown.

CONSULT-II OPERATION

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.




1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn ignition switch ON.




2. Touch "START (NISSAN BASED VHCL)".




3. Touch "BCM" on "SELECT SYSTEM" screen.
If "BCM" is not indicated, go to GI-37, "CONSULT-II Data Link Connector (DLC) Circuit". CONSULT-II Checking System




4. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.