Ignition Coil: Service and Repair

IGNITION COIL





Removal and Installation

REMOVAL
1. Remove the engine cover with power tool.
2. Drain engine coolant. Refer to "DRAINING ENGINE COOLANT".
3. Disconnect the mass air flow sensor electrical connector and remove the air cleaner assembly and air intake tubes.
4. Remove the windshield wiper arms and motor assembly and the front cowl panel. Refer to "Removal and Installation".
5. Remove the intake manifold collector, gasket, and throttle body.
6. Remove the six ignition coils.

CAUTION: Do not shock it.

INSTALLATION
Installation is in the reverse order of removal.