Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D"or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK STARTING SYSTEM
Check starting system. Refer to "STARTING SYSTEM".
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.
2. CHECK CONTROL CABLE
Check the control cable.
Refer to "Control Cable Adjustment".
OK or NG
OK >> GO TO 3.
NG >> Adjust control cable. Refer to "Control Cable Adjustment".
3. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis.
Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> INSPECTION END