In "N" Position, Vehicle Moves
In "N" Position, Vehicle MovesSYMPTOM: Vehicle moves forward or backward when selecting "N" position.
DIAGNOSTIC PROCEDURE
1. CHECK A/T FLUID LEVEL
Check the A/T fluid level. Refer to "A/T FLUID CHECK".
OK or NG
OK >> GO TO 2.
NG >> Refill ATF.
2. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis.
Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> GO TO 3.
3. CHECK CONTROL CABLE
Check the control cable.
Refer to "Control Cable Adjustment".
OK or NG
OK >> GO TO 3.
NG >> Adjust control cable. Refer to "Control Cable Adjustment".
4. CHECK SYMPTOM
Check again.
OK or NG
OK >> INSPECTION END
NG >> GO TO 4.
5. CHECK TCM
1. Check TCM input/output signal. Refer to "TCM Input/Output Signal Reference Values".
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.