Rear

PRECAUTIONS
Precautions
^ When installing each rubber part, final tightening must be carried out under unladen condition* with tires on ground.
Oil will shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
* Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
^ After installing removed suspension parts, check wheel alignment.
^ Do not jack up at the trailing arm and lateral link.
^ Lock nuts are not reusable parts, always use new ones. When replacing, do not wipe the oil off of the new lock nut before tightening.