1. Check Before Engine Is Started

1. CHECK BEFORE ENGINE IS STARTED
1. CHECK A/T CHECK (POSITION) INDICATOR LAMP





1. Park vehicle on flat surface.
2. Move selector lever to P position.
3. Turn ignition switch to OFF position. Wait at least 5 seconds.
4. Turn ignition switch to ON position. (Do not start engine.)
5. Does A/T check (position) indicator lamp come on for about 2 seconds?
Yes or No
Yes >> GO TO 2.
No >> Stop ROAD TEST. Go to AT-216, "1. A/T Check (Position) Indicator Lamp Does Not Come On".

2. CHECK A/T CHECK (POSITION) INDICATOR LAMP





Does A/T check (position) OFF indicator lamp flicker for about 8 seconds?
Yes or No
Yes >> Perform self-diagnosis and check NG items on the DIAGNOSTIC WORKSHEET, AT-61, Refer to AT-55, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". Introduction
No >> 1. Turn ignition switch to OFF position.
2. Perform self-diagnosis and note NG items.
Refer to AT-55, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". Without Scan Tool
3. Go to AT-75, "2. CHECK AT IDLE". 2. Check at Idle