Cruise Test-Part 2
Cruise Test-Part 21. CHECK STARTING GEAR (D1) POSITION
1. Confirm gear selector lever is in D position.
2. Accelerate vehicle by half throttle again.
3. Does vehicle start from D1?
Read gear position.
Yes or No
Yes >> GO TO 2.
No >> Go to AT-249, "16. Vehicle Does Not Start From D1". Continue ROAD TEST.
2. CHECK SHIFT UP AND SHIFT DOWN (D3 TO D4 TO D2)
1. Accelerate vehicle to 80 km/h (50 MPH) as shown in illustration.
2. Release accelerator pedal and then quickly depress it fully.
3. Does A/T shift from D4 to D2 as soon as accelerator pedal is depressed fully?
Read gear position and throttle opening.
Yes or No
Yes >> GO TO 3.
No >> Go to AT-233, "9. A/T Does Not Shift: D4 -> D2 or Does Not Kickdown: D4 -> D2". Continue ROAD TEST.
3. CHECK SHIFT UP (D2 TO D3)
Does A/T shift from D2 to D3 at the specified speed?
Read gear position, throttle opening and vehicle speed.
Specified speed when shifting from D2 to D3: Refer to "Shift Schedule".
Yes or No
Yes >> GO TO 4.
No >> Go to AT-236, "10. A/T Does Not Shift: D2 -> D3". A/T Does Not Shift: D2 -> D3 Continue ROAD TEST.
4. CHECK SHIFT UP (D3 TO D4) AND ENGINE BRAKE
Release accelerator pedal after shifting from D2 to D3.
Does A/T shift from D3 to D4 and does vehicle decelerate by engine brake?
Read gear position, throttle opening and vehicle speed.
Yes or No
Yes >> 1. Stop vehicle. 2. Go to AT-87, "Cruise Test-Part 3". Cruise Test-Part 3
No >> Go to AT-239, "11. A/T Does Not Shift: D3 -> D4". A/T Does Not Shift: D3 -> D4 Continue ROAD TEST.