Shift Linkage: Adjustments

Cable Adjustment

NOTE: After installation of the select cable, the cable must be adjusted for proper operation. This adjustment is per formed before installing the interior console and shift boot.





1. Slide clip "B" from underclip "A" as shown.
2. Shift the control lever to the neutral position.

CAUTION: Do not move the control lever when adjusting the cables.





3. Push clip "A" into the cable end case until it snaps into place as shown.





4. Slide clip "B" back over clip "A" until it snaps into place and holds clip "A" in place as shown.