Function of Center Switch

FUNCTION OF CENTER SWITCH

Display with Pushed "DEST" button




- Easy Mode




- Expert Mode




Display with Pushed "ROUTE" button




- Easy Mode




- Expert Mode

Display with Pushed "SETTING" button







The function of each icon is as shown:

Display Settings







How To Perform Navigation Setting
1. Start the engine.
2. Push "SETTING" button.
3. Select "Display".

Brightness/Contrast/Map Back ground

How To Perform Navigation Setting
1. Select "Brightness/Contrast/Map Background".
- Brightness, Contrast and Back ground are shown at the lower part of the screen, and it can be set by pushing joystick.

Display Off

How To Perform Navigation Setting
1. Select "Display Off".
- When setting is turned on (Indicator light ON), the display will be under sleep mode.

Setting of the under section display

How To Perform Navigation Setting
1. Select "Setting of the Under Section Display".
- The setting status that is selected from A/C or AV is shown at the lower part of the screen







Vehicle Electronic Systems

How To Perform Navigation Setting
1. Start the engine.
2. Push "SETTING" button.
3. Select "Vehicle Electronic Systems".

System Settings







How To Perform Navigation Setting
1. Start the engine.
2. Push "SETTING" button.
3. Select "System Settings".

Language Setting




How To Perform Navigation Setting
1. Select "Language/Unit".
- Language setting can be switched.
- Unit setting can be changed.

Clock Settings




How To Perform Navigation Setting
1. Select "Clock".
- Select the "Hours" or "Minutes" key and tilt the joystick to the right or left to adjust the time.
- Turn ON and OFF daylight saving time.
- Select the "Auto Adjust" key. The time will be reset to the GPS time.
- Select the "Select Time Zone" key. The [TIME ZONE] screen will appear.

Beep Setting




How To Perform Navigation Setting
1. Select "Beep Setting".
- When Beep Setting is on (indicator light on), a beep will sound the button is pushed.

NOTE: Items in exception of Beep Setting ON/OFF.

- An error beep.
- An interrupted-screen beep.

Navigation Setting







How To Perform Navigation Setting
1. Start the engine.
2. Push "SETTING" button.
3. Select "NAVIGATION".

"VIEW" MODE




1. Select "Birdview" or "Plan View" icon.
- To open the map screen display with Birdview(TM), select "Bird-view".
- To open the map screen display with Plan View, select "Plan View".




"HEADING" MODE
- To display North up, select "North up".
- To display the car heading up, select "Heading up".




"NEARBY DISPLAY ICONS" MODE
- Select an icon to display on the map screen.




"SAVE CURRENT LOCATION" MODE
- The current vehicle location can be registered in "Address Book".

NOTE: "Address Book" can store 50 items max.

"ADJUST CURRENT LOCATION" MODE




1. Select an icon "right" or "left" to calibrate the heading direction (Arrow marks will rotate corresponding to the calibration key.)




2. Select "Set". Then the vehicle mark will be matched to the arrow mark.




"AUTO RE-ROUTE" MODE
- To activate "AUTO RE-ROUTE" mode, select "On".
- To deactivate "AUTO RE-ROUTE" mode, select "Off".




"AVOID AREA SETTINGS" MODE
- Areas to avoid can be registered.




"CLEAR MEMORY" MODE
- To delete all the stored places in "Address Book", "Avoid Area" and "Previous Destinations", select "Yes".




"EDIT ADDRESS BOOK" MODE
- Edit the items registered in Address Book.




"GPS INFORMATION" MODE
- Latitude, longitude, altitude, astrometric state, and satellite location are displayed as GPS information.

NOTE: Altitude is displayed only in three-dimensional status.




"QUICK STOP CUSTOMER SETTING" MODE
- Select a category for the "Quick Stop" menu.




"SET AVERAGE SPEED" MODE
- Set the average vehicle speed to calibrate the estimated journey time for the destination.
- Set three items: "Freeway", "Main Roads", and "Ordinary Roads".




"TRACKING" MODE
- To delete the tracking marks on the map, select "Off".
- To leave the tracking marks on the map, select "On".

NOTE: When a trail display is turned OFF, trail data is erased from the memory.

GUIDANCE VOLUME

Description
Following guidance volume settings can be changed.

Activation/Deactivation Setting
- The voice prompt can be turned on/off by pressing the "Guidance Volume" button.

Voice Volume Setting
- Volume of the voice can be controlled by tilting the joystick to left/right.




DISPLAY WITH PUSHED "TRIP" BUTTON
- When the "TRIP" button is pushed, the given models will display on the screen.
- Warning message (if there are any)->TRIP1->TRIP2->FUEL ECONOMY->MAINTENANCE->OFF.




TRIP 1 OR TRIP 2
- Elapsed time, Driving distance and Average speed are displayed as Trip 1 information or Trip 2 information.
- The way to reset is by pushing the "Reset" switch or by keeping pushing "TRIP" button more than 1.5 seconds.




FUEL ECONOMY
- Average Fuel Economy, Distance to Empty, Fuel Economy are displayed as Fuel Economy information.
- The way to reset is by pushing the "Reset" switch or by keeping pushing "TRIP" button more than 1.5 seconds.




MAINTENANCE
- Engine Oil and Tire Rotation are displayed as Maintenance information.




ENGINE OIL OR TIRE ROTATION
- Possible to set up interval of engine oil and tire rotation by tilting joystick right and left.

WARNING INDICATIONS




Warning signal (door switch signal) is received from BCM through CAN communication line.







Warning signal (trunk status signal) is received from BCM through CAN communication line.