Front Bumper: Service and Repair

FRONT BUMPER




Removal and Installation

REMOVAL
1. Remove grille top cover.
2. Remove radiator grille. Refer to "FRONT GRILLE".
3. Remove screws on each side of bottom of fascia that attach fascia to bottom of fender protector. Partially remove fender protector. Refer to "FENDER PROTECTOR".
4. Remove engine underside covers.
5. Remove engine front undercover.
6. Unplug connectors to cornering lights in fascia.
7. Remove front bumper fascia.
8. Pull off energy absorbing foam from front bumper.
9. Unplug ambient temperature sensor where it is attached to front bumper reinforcement.
10. Remove front bumper reinforcement.
11. Remove front bumper supports.
12. Unplug harnesses and remove headlight assemblies.

INSTALLATION
Installation is in the reverse order of removal.