Trunk / Liftgate Latch: Service and Repair

Removal and Installation of Trunk Lid Lock

LOCK REMOVAL




1. Remove the trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER".
2. Disconnect the release cable.
3. After disconnecting the harness connector, remove the bolts and the trunk lid lock

LOCK INSTALLATION
Installation is in the reverse order of removal.
- After installing, close the trunk lid lightly. Perform the lock and surface height adjustment. Refer to BL-76, "Fitting Adjustment". Adjustments
- After installing, check the operation.