With Manufacturer's Scan Tool (CONSULT-II)

CONSULT-II BASIC OPERATION PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.




1. With ignition switch OFF, connect CONSULT-II to data link connector on vehicle, and turn ON ignition switch.




2. Touch "START (NISSAN BASED VHCL)".




3. Touch "BCM" on "SELECT SYSTEM" screen.




4. Select item to be diagnosed on "SELECT TEST ITEM" screen.