Automatic Drive Positioner

AUTOMATIC DRIVE POSITIONER

System Description

OPERATIVE CONDITION
The drive position can be set in 2 ways, manually and automatically.

Manual Operation
The driving position (seat position, steering wheel position and door mirror position) can be adjusted with the power seat switch, ADP steering switch or door mirror remote control switch.

NOTE: The door mirrors can be manually operated with the ignition switch turned to ACC or ON.




Automatic Operation

NOTE:
- Disconnecting the battery erases the stored memory.
- After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open) -> OFF (close) -> ON (open), the Entry/Exiting operation becomes possible.
- After exiting operation is carried out, entry operation can be operated.






NOTE: During automatic operation, if the ignition switch is turned ON -> START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.

SYSTEM DESCRIPTION
- The system automatically moves the driver seat and steering wheel to facilitate entry/exit to/from the vehicle. The automatic drive positioner control unit can also store the optimum driving positions (driver seat, steering wheel position and door mirror position) for 2 people. If the drivers change, one-touch operation allows changing to the other driving position.
- The settings (ON/OFF) of the automatic sliding seat (Entry/Exiting operation) at entry/exit can be changed as desired.




Fail-Safe Mode
When the ignition switch is in the ON position, if any of the parts (indicated in the following chart) move more than the specified amount within a period "T1" when no "ON" input is sent from any of the switches (indicated in the chart), or an output from the automatic drive positioner is not produced, an output malfunction is sensed. Motor operation will be suspended automatically, and all automatic operations will be ineffective. (In this case, the motor will not operate manually).

Cancel of Fail-safe Mode
- The mode is cancelled when the selector lever is shifted to P position from any other position for A/T or parking brake is engaged for M/T.