Initial Inspection and Diagnostic Overview
PRELIMINARY CHECKSetting Change Function
The settings of the automatic driving position system can be changed, using CONSULT-II.
It is possible to set sliding driver seat and steering wheel raise for entry/exit of vehicle by pressing set switch.
NOTE:
- After the setting is registered, the new setting is effective, even if the battery is disconnected.
- If setting change function cannot be set with CONSULT-II or display, refer to"CONSULT-II FUNCTION (AUTO DRIVE POS.)".
- If setting change function cannot be set with set switch, refer to "SEAT MEMORY SWITCH CIRCUIT INSPECTION".