Torque Specifications

TORQUE SPECIFICATIONS











Cylinder Head Bolts
Step a 98 Nm (10 kg-m, 72 ft. lbs.)
Step b 0 Nm Loosen in the reverse order of tightening
Step c 32.9 Nm (4.0 kg-m, 29 ft. lbs.)
Step d 90° degrees clockwise
Step e 90° degrees clockwise


Cylinder Head Bolts






CAUTION: Cylinder head bolts are tightened by degree rotation tightening method. Whenever the size difference between d1 and d2 exceeds the limit, replace the bolts with new ones.

Limit (d1 - d2) 0.11 mm (0.0043 inch)

If a reduction in outer diameter appears in a position other than d2, use it as the d2 measuring point.









Camshaft Bracket Bolts
Step 1 (bolts 7 - 10) 1.96 Nm (0.2 kg-m, 17 inch lbs.)
Step 2 (bolts 1 - 6) 1.96 Nm (0.2 kg-m, 17 inch lbs.)
Step 3 5.88 Nm (0.6 kg-m, 52 inch lbs.)
Step 4 (bolts 1 - 6) 10.4 Nm (1.1 kg-m, 92 inch lbs.)


Intake Manifold
Stud bolts 9.8 - 11.8 Nm (1.0 - 1.2 kg-m, 87 - 104 inch lbs.)





Intake Manifold Bolts
Step 1 4.9 - 9.8 Nm (0.5 - 0.99 kg-m, 44 - 86 inch lbs.)
Step 2 26.5 - 31.4 Nm (2.7 - 3.2 kg-m, 20 - 23 ft. lbs.)
Step 3 26.5 - 31.4 Nm (2.7 - 3.2 kg-m, 20 - 23 ft. lbs.)








Exhaust Manifold Nuts 28.4 - 33.3 Nm (2.9 - 3.3 kg-m, 21 - 24 ft. lbs.)

Camshaft sprocket bolts 98 - 107 Nm (10.5 - 10.9 kg-m, 73 - 78 ft. lbs.)