Fog/Driving Lamp Bulb: Service and Repair

Bulb Replacement
1. For LH side, remove air cleaner case.
For RH side, position IPDM E/R aside and remove washer tank inlet. Refer to "Removal and Installation of IPDM E/R".




2. Turn the plastic cap counterclockwise to unlock it from the combination lamp.
3. Disconnect fog lamp bulb connector.
4. Unlock the retaining spring and remove the bulb.

CAUTION:
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
- Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc., may affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.
- After installing the bulb, be sure to install the plastic cap securely to ensure watertightness.

Installation is in the reverse order of removal.