Horn: Service and Repair

Removal and Installation

REMOVAL (HORN HIGH)




1. Remove right headlamp. Refer to "Combination Lamp Removal and Installation".
2. Disconnect horn connector.
3. Remove horn.

INSTALLATION (HORN HIGH)
Tighten horn bolt to specified torque.

Horn bolt : 15.6 - 18.6 Nm (1.6 - 1.8 kg-m, 12 - 13 ft-lb)

1. Reconnect horn connector.
2. Install right headlamp. Refer to "Combination Lamp Removal and Installation".

REMOVAL (HORN LOW)




1. Remove left headlamp. Refer to "Combination Lamp Removal and Installation".
2. Disconnect horn connector.
3. Remove horn.

INSTALLATION (HORN LOW)
Tighten horn bolt to specified torque.

Horn bolt : 15.6 - 18.6 Nm (1.6 - 1.8 kg-m, 12 - 13 ft-lb)

1. Reconnect horn connector.
2. Install left headlamp. Refer to "Combination Lamp Removal and Installation".